Sandia National Laboratories researchers developed a new system to monitor how clouds affect large-scale solar photovoltaic (PV) power plants. By observing cloud shape, size and movement, the system provides a way for utility companies to predict and prepare for fluctuations in power output due to changes in weather.
(September 28, 2010) — Sandia National Laboratories researchers developed a new system to monitor how clouds affect large-scale solar photovoltaic (PV) power plants. By observing cloud shape, size and movement, the system provides a way for utility companies to predict and prepare for fluctuations in power output due to changes in weather. The resulting models will provide utility companies with valuable data to assess potential power plant locations, ramp rates and power output.
“As solar power continues to develop and take up a larger percentage of grids nationwide, being able to forecast power production is going to become more and more critical,” said Chris Lovvorn, director of alternative energy of Castle & Cooke Resorts, LLC, which owns 98 percent of the island. “Sandia’s involvement and insight has been invaluable in our efforts to meet 100 percent of the island’s energy needs with renewable resources.”
The effects of clouds on small PV arrays are well-documented, but there is little research on how large-scale arrays interact and function under cloud cover. A small system can be completely covered by a cloud, which drastically reduces its power output, but what’s less well understood is what happens when only part of a large system is covered by a moving cloud shadow, while the rest stays in sunlight.
“Our goal is to get to the point where we can predict what’s going to happen at larger scale plants as they go toward hundreds of megawatts. To do that, you need the data, and the opportunity was available at La Ola,” said Sandia researcher Scott Kuszmaul.
The high penetration of PV power on Lana’i, combined with the sun and cloud mix at the 10-acre La Ola plant, provides an optimal environment for prediction and modeling research. Research could not interfere with the ongoing operations of the plant, which currently sells power to Maui Electric Company (MECO), so Sandia engineers connected 24 small, nonintrusive sensors to the plant’s PV panels and used a radio frequency network to transmit data. The sensors took readings at one-second intervals to provide researchers with unprecedented detail about cloud direction and coverage activity.
A radio frequency transmission system has the added benefit of being portable. “Currently, a utility company that wants to build a large solar PV power plant might have a lot of questions about the plant’s output and variability at a proposed site. Work being done at the La Ola plant is leading to new methods that eventually can be used to answer these questions,” said Sandia researcher Josh Stein. “These techniques will allow a developer to place a sensor network at a proposed site, make measurements for a period of time and use that to predict plant output variability.”
La Ola was commissioned in December 2008 by Castle & Cooke Resorts, LLC, and SunPower Corp., a manufacturer of high-efficiency solar cells. The project uses SunPower’s Tracker technology. Panels rotate on a single axis to follow the sun, which increases energy capture by up to 25%. Since February, Sandia Labs has held a cooperative research and development agreement (CRADA) with SunPower to conduct research on integrating large-scale PV systems into the grid. The CRADA is funded with about $1 million of combined U.S. Department of Energy and SunPower funding and is expected to achieve significant results, which will be disseminated through joint publications over the next two years.
For more information about Sandia’s photovoltaic work, please visit: www.sandia.gov/pv.