2010 is shaping up to be a better year, but not without challenges. iSuppli’s Henning Wicht and Greg Sheppard examine forecasted PV installations and capacity, why price structures are heading down, and how the industry will transform into fierce competition and aggregation.
This article was originally published by RenewableEnergyWorld.com and was reprinted by permission.
by Henning Wicht and Greg Sheppard, iSuppli
The year 2009 was tough on every industry, and the ‘hot’ solar energy industry wasn’t immune to the global recession and the financial market upheaval. And, although 2010 is shaping up to be a better year, it won’t be without its challenges. But what are the major business challenges that industry players will face in the coming year and what are their implications?
iSuppli is forecasting that installed capacity of PV systems will grow some 68% in 2010, reaching 8.6 GW globally. This represents a return to growth not seen since the autumn of 2008 as the global recession recedes and as new geographies and segments of demand emerge. But 2009 witnessed tremendous price erosion, with average crystalline module prices down 38%, solar wafer prices down 50%, and polysilicon spot prices down 80%, as shown in Figure 1. We believe this represents a permanent ratcheting down of price structures that will transform the industry into a very competitive market place, with weaker players dropping out and a select few aggregating larger pieces of the market.
|Figure 1: PV Price projections 2008-2010.|
One of the major implications is that industry players will need to continue to accelerate cost-down roadmaps in an effort to keep up with the price declines and to repair shrinking profit margins. Figure 2 shows operating profit margins for polysilicon, cell/module players, and the so-called integrated players which combine at least four nodes in the chain. After suffering a loss for much of 2009, our analysis suggests that profits will move into the positive in Q4 2009 and continue to improve during 2010. We are projecting that the average will pop back above 10% by Q4 2010 with the over supplied polysilicon area lagging behind in profit strengthening. Our major underlying assumption behind the improvement in the profit picture is due to cost-down programmes catching up with the rate of price declines.
|Figure 2: PV industry operating profit margins.|
In 2009, the price of an average PV system declined about 11% while the price of an average crystalline module declined 38%. For 2010, system prices are predicted to fall another 10%, while modules will drop another 20%.
There appear to be three drivers for this divergence. One is that prices for the balance-of-system (BOS) elements and installation-related costs (engineering, procurement, and construction (EPC)) are declining more slowly. Another reason rests with the fractured nature of the installation node, where there is less motivation to pass along the cost savings. The third, which is related to the second, concerns the very act of providing incentives for PV electricity projects (feed-in tariffs, rebates, tax credits, etc.) which helps keep system prices higher.
The thinking behind this last point is that project developers and installers just need to show the system owner sufficient ROI and payback periods — not necessarily the lowest price — to make the deal. This is made possible by the fragmentation of the installation node of the PV value chain.
There are literally thousands of project developers and installers in the world, most of them not subjected to the intense commodity-like competition that their supply chain faces. This is both a drag on the development of the industry, as well as an opportunity for the best margins in the business.
Why feed-in tariffs really are causing a fit
|New entrants on the march
Expect more players to enter the PV space in 2010 as they try to leverage potential competitive advantages from other industries. Top of the list are Samsung and LG Electronics (the largest shareholder of LG Displays), already the world’s largest LCD panel makers. These companies have vast experience in bringing down costs, raising quality, and ramping to high volumes. Both these companies can potentially benefit by the procurement leverage of items like glass, wafers, polysilicon, and manufacturing equipment. They are also well versed at moving into areas after they have been established and then eventually dominating them.
LG Electronics has already announced it will start large-scale production in both cells and modules (thin-film and crystalline) from its new 120 MW capacity plant in early 2010. It claims its thin-film technology has 11.1% efficiency.
TSMC, one of the world largest manufacturers of chips and buyers of electronic-grade wafers, has also begun to diversify into PV. Its most significant move to date is taking a 20% stake in cell maker Motech. TSMC is experienced in large-scale manufacturing and cost-reduction programmes, and also has an existing footprint in China. Look for them to bring similar advantages as the Korean giants to the party.
Bechtel, the large EPC firm with more than US$31 billion in annual revenues, has officially entered the solar industry. The company has been contracted to design and install 440 MW of CSP in southern California. Bechtel, a huge private company famous for building airports, dams, and transportation systems, could become a significant player in project development and an entity that many could want to partner with.
The major implication of these new entrants on current industry players is that the latter group needs to watch out. Don’t get caught thinking, ‘They’ll never make it; we’re too far down the learning curve to get hurt.’ It is simply amazing how hiring the right handful of people and bundling with deep-pocketed capital can change things.
A great deal of uncertainty has been injected into the sector from the world’s largest market, Germany. Like Spain last year, the threat of a potential ‘additional’ reduction in the feed-in tariff (FiT) has created a spike in German market demand for PV systems. Germany will account for 50% of total worldwide PV installations in 2009.
The new government in Germany is assessing the burden posed by the current FiT regime on rate payers and electricity utilities. Current speculation is that by mid-year, an extra lowering of the FiT will have been in the works. This would extend the demand bubble seen in the last few months of 2009 into the first half of 2010. The main implication is continuing tight conditions with regard to supply and firm pricing — for a while. Then, depending on how ‘orderly’ the PV industry reacts, there is the potential of another supply glut returning in the second half of 2010. Only the best managed companies will be able to profitably navigate this uncertainty.
It’s not by accident that the world’s largest solar panel maker, First Solar, is also the lowest-cost high-volume producer. First Solar is a producer of thin-film modules based on CdTe technology. iSuppli predicts the average price gap between thin-film and crystalline technologies will narrow to $0.60/W in 2010 after averaging $0.80/W in 2009. This narrowing gap is a reflection not only of a lot of pain and suffering in the crystalline supply chain, but also of essentially zero profit collectively for those producers. In 2010, crystalline module prices are predicted to drop by another 20% to $2/W and thin-film by 18% to $1.40/W. The major implication of this outcome is that if companies aren’t meeting or beating these percentage take-downs, they stand to lose market share in 2010.
New polysilicon technologies like Fluidized Bed Reactor (FBR) and Upgraded Metallurgical Grade (UMG) also found that 2009 was not a kind year. In an era of $400/kg pricing, their potential loomed greatly in 2008. But now that we are entering an era of sub-$50 polysilicon, the reward/risk of these technologies has diminished their near-term commercial potential. For the foreseeable future, FBR and UMG market penetration will be curtailed given that the challenges these technologies present overwhelms their now greatly reduced cost advantages.
Expect the modified Siemens method for polysilicon manufacturing to continue to dominate as numerous capacity expansions become available in the coming two years and as various FBR and UMG projects get delayed or even cancelled. MEMC stands alone as the company that has mastered FBR, while REC is backing away from it. As for UMG polysilicon, different players have resorted to mixing it with higher-priced, higher-purity polysilicon in order to raise its efficiency to more marketable levels. This has contributed to its pricing being even closer to the Siemens-method polysilicon. Of additional note, many cell manufacturers are restructuring and focusing on core competencies and do not have the time or money to follow a new polysilicon path.
Installations in 2010 are projected to grow 68% to 8.6 GW. This is a middle-of-the-road forecast based on a recovering global economy, dropping prices, and continued diffusion into both established and emerging markets. We do not see major barriers in Italy, California/US, France, and Spain. However, Germany, Japan, and China still have pending discussions on rebate programmes and FiTs. Germany will drive the market in the first half of 2010, but the market could face another stall this summer.
The German government is discussing if the current FiT in 2010 will be trimmed even further from the 9% (11% for large installations) reduction in January 2010. Given the large system price decline, a significant adjustment of funding appears reasonable, but any change would create a short-term ‘boom’ situation before the new FiT applies.
As a result of discussion among politicians and political experts, the government is aware of the negative effects of FiT changes. The latest feedback indicates a more than 20% reduction from the 2009 FIT by July 2010, anticipated as this magazine goes to press.
In any case, as soon as the weather conditions will allow, the German market will surge. If the FiT is indeed trimmed it could drop significantly from 500 MW to 100 MW per month. Meanwhile, PV demand from other countries will not be able to outbalance a German FiT reduction of 20% by mid-2010 (Figure 3) and thus a German FiT penalty could stall the solar market in mid-2010.
|Figure 3: Forecast of PV installations in 2010 (assuming additional German FiT penalty by mid-2010)|
More efficient solar modules will continue to command price premiums, but suppliers will have less success in getting these prices to stick than in the past. For applications where space is limited or expensive, efficiency will continue to be valued and a premium paid. But this premium will be fleeting as buyer/plant owner expectations are shaped by payback times, initial out-of-pocket expense, and FiT incentives that are ratcheting down in key countries.
The latter point means that upfront costs will become a larger factor in decision making. A major implication of this is that companies and their investors will find greater acceptance of new technology as well as manufacturing breakthroughs that can demonstrate lower, and at least comparable, costs per watt.
Even though the industry has done a good job of reducing its inventories, the improvement is tenuous because of big swings in utilization rates on existing capacity. Inventory is very hard to plan given all the lumpy FiT demand bubbles hitting the industry, with the German market being the latest uncertainty. True, modules are getting absorbed now, but by the middle of the year, the industry could be swamped again with excess.
From polysilicon to modules, companies have curtailed production by idling lines and running fewer shifts. Average capacity utilization across all nodes is estimated at 70% in 2009. Some companies were sold out all year, while others where swimming in excess. In addition, there were many capacity expansions during the year. And, while there is a lot of debate on how to measure capacity, our definition assumes 24/7 utilization of lines/equipment that is already in place.
We believe excess capacity in 2010 will keep prices flattened (at least, not raising them).
Enter the dragon, the eagle and others
For 2010 we expect several significant new geographic growth markets to be fought for. Most significant are China, the United States and Italy, which are predicted to collectively account for 50% of the growth that takes place in 2010. Germany will remain the biggest market, but these other countries will rise in importance during the year. China is the latecomer as it races to inject more renewable content into its energy portfolio.
Companies positioned strategically in these markets now stand the greatest chance of grabbing share over the next years. Even though local manufacturing can help provide competitive advantage, it is not as crucial as before as module prices have dropped precipitously. So far, the reduction of shipping and other logistics-related charges — as well as the availability of government incentives — has not proven motivation enough for setting up local production for many firms.
In the meantime, some companies are using electronics manufacturing service providers to build modules. In two to three years, however, the ‘landed costs’ of logistics and localization incentives will become larger factors.
Consequently, markets that pass the 500 MW annual total market shipment level should see more investment in module production in the coming years.
Continuing the trend begun in earnest during 2009, more PV industry companies are expected to shift closer to adding value for the users of PV electricity. PV supply chain companies are investing directly into long-term and development-time ownership of solar installations as well as taking control of EPC or installation services. Prime examples are MEMC buying SunEdison and LDK investing in solar farms in China.
One company, Conergy, has turned from being a supply chain player to being a project developer. There are multiple benefits to this downstream focus, including creating more developed sales channels, creating your own customer, and in some cases (but not all), improving profitability.
Henning Wicht and Greg Sheppard are respectively senior director and principal analyst, photovoltaics, and chief research officer for iSuppli. e-mail: email@example.com
This article is an excerpt from the iSuppli Market Tracker report, “The Business of Photovoltaics in 2010,” released in February 2010.