A Two-in-One Energy Solution: Capturing Waste Heat for Electricity

In Dublin, Ohio, the Community Recreation Center decided to reduce its energy waste. Rather than rely on an electric utility to burn more coal or natural gas to provide electricity, as well as its own boilers to burn more fuel to provide heat, the facility decided to install a combined heat and power (CHP) unit.

The CHP or “cogeneration” project produces both electricity, allowing the Center to keep its lights on during power outages — and heat — keeping offices and swimming pools warm. The CHP unit is financed with private capital and will allow the Center to save roughly 10 percent on its energy bills.

“It’s pretty simple,” said Patrick Smith, a co-developer of the Dublin project. “It’s a generator, and we happen to capture the heat.”

Technology of the Past…

Cogeneration is not a new concept or technology. In fact, Thomas Edison’s first power plants sold both heat and electricity to nearby buildings and factories. Yet to electrify America quickly in the early 20th century, policymakers and power companies created monopoly electric utilities that were protected from competition and guaranteed profits based on how much money they spent. As a result, for many decades, utilities favored larger and larger power plants that were placed far away from the buildings and factories that could have used their wasted heat.   

America, of course, has long been electrified, but the model of monopoly-owned and electric-only power plants persists. And the waste is substantial. The typical power plant burns three units of fuel to generate just one unit of electricity. That 33 percent efficiency rate has not improved by a single percentage point since the late 1950s. Can you imagine if our cars wasted two-thirds of gasoline we put in them every time we filled up?

…Innovation for the Future

The typical power plant burns three units of fuel to generate just one unit of electricity. That 33 percent efficiency rate has not improved by a single percentage point since the late 1950s.

CHP units, in contrast, achieve efficiencies of 60 to 90 percent. When designed and engineered appropriately for the facility in which they’re installed, they also significantly reduce on-site emissions of carbon dioxide and other pollutants, such as nitrogen oxides (NOx) and sulfur oxides (SOx).

Fortunately, lawmakers and regulators are beginning to pay attention to CHP. The U.S. Environmental Protection Agency, for instance, identified efficient cogeneration as a means to meet the proposed Clean Power Plan, the nation’s first-ever limit on carbon dioxide pollution from existing power plants. That’s why the Ohio Environmental Council and Environmental Defense Fund recently asked the Public Utility Commission of Ohio to support Ohio Power Company and Kraton Polymers’ joint application to use a new CHP project to help the utility meet its energy efficiency goals.

Currently, CHP provides 12 percent of U.S. electricity, virtually the same as solar, wind, biomass, and hydropowercombined, but, according to the Oak Ridge National Laboratory, CHP could supply as much as 20 percent of U.S. electric capacity by 2030. If CHP reaches this threshold, it would:

  • create nearly one million new, highly-skilled technical jobs across the country;
  • save the U.S. more than 5 quadrillion Btu (Quads) of fuel annually, the equivalent of nearly half the total energy used by U.S. households; and
  • reduce carbon dioxide emissions by more than 800 million metric tons per year, the equivalent of removing more than half of the passenger vehicles from the road.

The Dublin and other CHP projects demonstrate the need for a broader definition of efficiency. Rather than just focus on how residents and businesses can reduce their electricity use, perhaps by adding insulation or installing modern appliances, utilities and other power companies also need to look at new (and old) technologies, like CHP, to obtain substantial efficiency gains for their power plants.

This article was originally published on EDF and was republished with permission.

Lead image: Biogas plant. Credit: Shutterstock. 

Previous articleSolar Power Shining Bright in Cambodia
Next article8.4-MW Cogeneration Plant to Power Los Angeles International Airport
Dick Munson is EDF's Director, Midwest Clean Energy, where he works to advance the use of clean energy in Illinois, Ohio, and Pennsylvania. Dick currently focuses on creating new financing opportunities for efficiency, on ensuring smart meters provide the real-time data that will enable consumers to cut energy and pollution, and on building the business case for efficiency within commercial buildings.

No posts to display