Blogs, Energy Efficiency, Monitoring, Rooftop, Solar

Is Commercial Rooftop Solar Feasible?

Recently on an online forum, users asked about understanding technology and analyzing costs for setting up commercial rooftop solar power solution. In Addition to pertinent questions they were looking for online resources that could provide answers. We pointed them to our tools that help to design a solar power solution yourself. But, adding our perspective on the practical problems that such solutions face, some questions may best be answered through a qualified blog post. So, here we go;

Q) How Much Area is Needed to Install Solar Panels?

A) Since this is dependent on the panel used and its wattage along with the efficiency, ability to provide qualified figures in the context of the Indian market was crucial. The Area Calculator will tell you how much area is needed to install solar?

Use Area Calculator Tool – How much Area is Needed to Install Solar

Q) Is Stable Voltage/Amp Combination Only for Large Solar Power Setups?

A) We’ll try to explain this non technically. The answer lies in system design and the “intent” of each the components used. Optimizing each solar component to make the complete solution work at its peak efficiency is a must and is not the simplest of things to do. PV panels directly connected to solar inverters to provide a certain voltage and frequency, can only do so if they are correctly matched with each other and the rest of the solar power system components. Even if there are variations depending upon the availability of sunlight, the right solar solution will ensure that the output remains stable. In fact the hall mark of a well designed solution is that a broader range of input voltage still providers a stably narrower range of desired output. The catch here is to do this without system losses. Good systems are designed to balance all these leading to over all higher system efficiencies. Point to remember is that all components contribute to system efficiency and so careful optimization is key. Ideally, scaling down such an optimized solution should not be an issue for experts. In fact new-age solar power stations are so modular in nature that in fact it’s the small parts that actually create the whole big solution. A smart solar design will ensure that the future expansion plans for the solar solution face no hurdle due to bad system architecture.

Good Solar Solutions are Easy to Scale Down

Q) How Well is my Solar Station Really Working?

A) All details of the solar power generation can be picked up via simple manual readings and appointed persons can easily be trained to perform this easy task. However advanced solar power solutions also provide data online updated almost in real time. Also solutions with monitoring often help signaling any inconsistencies well before they become troublesome. A good company will have pan India Installation set ups for any technical support required. A local team of qualified technicians should be typically available for minor maintenance, while any major issues must be handled directly by the manufacturer’s experts with an extremely short turn-around time. It is important to note however that solar solutions quietly generate power and require little to no maintenance or support, but for comfort a team available to be mobilized quickly when required in addition to a 24 x 7 helpline is a good idea. For end user comfort teams must be available to be mobilized quickly when required.

Solar Monitoring – Manual or Remote

Q) Why are Solar Mounting Systems Important?

A) Simply put because solar modules will need them for a long time. The solar panel mounting systems and the solar panels must not be anchored to the roof but should be retardant to easy theft. There are many ways of doing this and many theft retardant solutions can be put in place in addition to simply securing the perimeter of the solar installation. For a flat rooftop (which is typical) mounting solution must incorporate the location conditions so as to support the installation for its entire life while not harming the rooftop, which can cause serious structural damages.

Q) Do Solar Prices Already Include Subsidies?

A) Broadly speaking, they should! But practically there’s a catch, very few really claim or get the subsidies, but you shouldn’t worry about that. The point is, whether or not solar is subsidized as an end user your goal must be to calculate your benefits accrued against the current cost of power and the short and long term incremental costs, effectively called opportunity costs. What should also be looked for is the cost of not going doing anything, smart companies realize that the cost of maintaining status quo in a competitive market can be devastating. If your competitors can do it, you should give it serious thought now.

Cost effectiveness and life of as such solar setups can easily be determined by calculating the electricity costs that your solar power system will replace during its lifetime. What is needed is a simply to ask what is cost of energy from solar power solution.

#rewpage#

Q) Fully Integrated Solar Solutions Versus Grey-market Solution Vendors.

A) Okay, so its not a question, but its important. A company that does complete solution from design using their own optimized products and commissioning by their own trained technicians rather than third party labor must be preferred. Of course pricing cannot be off the charts and should justify the solution and provided. A single point of actual service is always better than secondary vendors.

Is your solar system really cheaper

To this goal of peaceful solar investment, a company that manufactures most of the equipment required must be chosen over vendors that simply source components from third party. A locally manufactured high quality solar system along with local warranty and support is always a better choice.

 

 

Like what you’ve read? Click here to subscribe to this blog!

– See more at: http://www.sunipod.com/blog/is-commercial-rooftop-solar-feasible/#.U7FY5kDzx2E

 

Recently on an online forum, users asked about understanding technology and analyzing costs for setting up commercial rooftop solar power solution. In Addition to pertinent questions they were looking for online resources that could provide answers. We pointed them to our tools that help to design a solar power solution yourself. But, adding our perspective on the practical problems that such solutions face, some questions may best be answered through a qualified blog post. So, here we go;

Q) How Much Area is Needed to Install Solar Panels?

A) Since this is dependent on the panel used and its wattage along with the efficiency, ability to provide qualified figures in the context of the Indian market was crucial. The Area Calculator will tell you how much area is needed to install solar?

– See more at: http://www.sunipod.com/blog/is-commercial-rooftop-solar-feasible/#.U7FZgkDzx  Is Commercial Rooftop Solar Feasible?

Recently on an online forum, users asked about understanding technology and analyzing costs for setting up commercial rooftop solar power solution. In Addition to pertinent questions they were looking for online resources that could provide answers. We pointed them to our tools that help to design a solar power solution yourself. But, adding our perspective on the practical problems that such solutions face, some questions may best be answered through a qualified blog post. So, here we go;

Q) How Much Area is Needed to Install Solar Panels?

A) Since this is dependent on the panel used and its wattage along with the efficiency, ability to provide qualified figures in the context of the Indian market was crucial. The Area Calculator will tell you how much area is needed to install solar?

 Use the Area Calculator Tool for Solar Installation

Use Area Calculator Tool – How much Area is Needed to Install Solar

Q) Is Stable Voltage/Amp Combination Only for Large Solar Power Setups?

 A) We’ll try to explain this non technically. The answer lies in system design and the “intent” of each the components used. Optimizing each solar component to make the complete solution work at its peak efficiency is a must and is not the simplest of things to do. PV panels directly connected to solar inverters to provide a certain voltage and frequency, can only do so if they are correctly matched with each other and the rest of the solar power system components. Even if there are variations depending upon the availability of sunlight, the right solar solution will ensure that the output remains stable. In fact the hall mark of a well designed solution is that a broader range of input voltage still providers a stably narrower range of desired output. The catch here is to do this without system losses. Good systems are designed to balance all these leading to over all higher system efficiencies. Point to remember is that all components contribute to system efficiency and so careful optimization is key. Ideally, scaling down such an optimized solution should not be an issue for experts. In fact new-age solar power stations are so modular in nature that in fact it’s the small parts that actually create the whole big solution. A smart solar design will ensure that the future expansion plans for the solar solution face no hurdle due to bad system architecture.

#rewpage#

Good Solar Solutions are Easy to Scale Down 

Good Solar Solutions are Easy to Scale Down

Q) How Well is my Solar Station Really Working?

A) All details of the solar power generation can be picked up via simple manual readings and appointed persons can easily be trained to perform this easy task. However advanced solar power solutions also provide data online updated almost in real time. Also solutions with monitoring often help signaling any inconsistencies well before they become troublesome. A good company will have pan India Installation set ups for any technical support required. A local team of qualified technicians should be typically available for minor maintenance, while any major issues must be handled directly by the manufacturer’s experts with an extremely short turn-around time. It is important to note however that solar solutions quietly generate power and require little to no maintenance or support, but for comfort a team available to be mobilized quickly when required in addition to a 24 x 7 helpline is a good idea. For end user comfort teams must be available to be mobilized quickly when required.

Solar Monitoring - Manual or Remote
Solar Monitoring – Manual or Remote

Q) Why are Solar Mounting Systems Important?

A) Simply put because solar modules will need them for a long time. The solar panel mounting systems and the solar panels must not be anchored to the roof but should be retardant to easy theft. There are many ways of doing this and many theft retardant solutions can be put in place in addition to simply securing the perimeter of the solar installation. For a flat rooftop (which is typical) mounting solution must incorporate the location conditions so as to support the installation for its entire life while not harming the rooftop, which can cause serious structural damages.

Q) Do Solar Prices Already Include Subsidies?

A) Broadly speaking, they should! But practically there’s a catch, very few really claim or get the subsidies, but you shouldn’t worry about that. The point is, whether or not solar is subsidized as an end user your goal must be to calculate your benefits accrued against the current cost of power and the short and long term incremental costs, effectively called opportunity costs. What should also be looked for is the cost of not going doing anything, smart companies realize that the cost of maintaining status quo in a competitive market can be devastating. If your competitors can do it, you should give it serious thought now.

Cost effectiveness and life of as such solar setups can easily be determined by calculating the electricity costs that your solar power system will replace during its lifetime. What is needed is a simply to ask what is cost of energy from solar power solution.

Q) Fully Integrated Solar Solutions Versus Grey-market Solution Vendors.

A) Okay, so its not a question, but its important. A company that does complete solution from design using their own optimized products and commissioning by their own trained technicians rather than third party labor must be preferred. Of course pricing cannot be off the charts and should justify the solution and provided. A single point of actual service is always better than secondary vendors.

Is your solar system really cheaper?
Is your solar system really cheaper?

To this goal of peaceful solar investment, a company that manufactures most of the equipment required must be chosen over vendors that simply source components from third party. A locally manufactured high quality solar system along with local warranty and support is always a better choice.

Free Solar Ebook Consumer Guide to Solar Power Solutions

Like what you’ve read? Click here to subscribe to this blog!

 

Recently on an online forum, users asked about understanding technology and analyzing costs for setting up commercial rooftop solar power solution. In Addition to pertinent questions they were looking for online resources that could provide answers. We pointed them to our tools that help to design a solar power solution yourself. But, adding our perspective on the practical problems that such solutions face, some questions may best be answered through a qualified blog post. So, here we go;

Q) How Much Area is Needed to Install Solar Panels?

A) Since this is dependent on the panel used and its wattage along with the efficiency, ability to provide qualified figures in the context of the Indian market was crucial. The Area Calculator will tell you how much area is needed to install solar?

Use Area Calculator Tool – How much Area is Needed to Install Solar

Q) Is Stable Voltage/Amp Combination Only for Large Solar Power Setups?

A) We’ll try to explain this non technically. The answer lies in system design and the “intent” of each the components used. Optimizing each solar component to make the complete solution work at its peak efficiency is a must and is not the simplest of things to do. PV panels directly connected to solar inverters to provide a certain voltage and frequency, can only do so if they are correctly matched with each other and the rest of the solar power system components. Even if there are variations depending upon the availability of sunlight, the right solar solution will ensure that the output remains stable. In fact the hall mark of a well designed solution is that a broader range of input voltage still providers a stably narrower range of desired output. The catch here is to do this without system losses. Good systems are designed to balance all these leading to over all higher system efficiencies. Point to remember is that all components contribute to system efficiency and so careful optimization is key. Ideally, scaling down such an optimized solution should not be an issue for experts. In fact new-age solar power stations are so modular in nature that in fact it’s the small parts that actually create the whole big solution. A smart solar design will ensure that the future expansion plans for the solar solution face no hurdle due to bad system architecture.

Good Solar Solutions are Easy to Scale Down

Q) How Well is my Solar Station Really Working?

A) All details of the solar power generation can be picked up via simple manual readings and appointed persons can easily be trained to perform this easy task. However advanced solar power solutions also provide data online updated almost in real time. Also solutions with monitoring often help signaling any inconsistencies well before they become troublesome. A good company will have pan India Installation set ups for any technical support required. A local team of qualified technicians should be typically available for minor maintenance, while any major issues must be handled directly by the manufacturer’s experts with an extremely short turn-around time. It is important to note however that solar solutions quietly generate power and require little to no maintenance or support, but for comfort a team available to be mobilized quickly when required in addition to a 24 x 7 helpline is a good idea. For end user comfort teams must be available to be mobilized quickly when required.

Solar Monitoring – Manual or Remote

Q) Why are Solar Mounting Systems Important?

A) Simply put because solar modules will need them for a long time. The solar panel mounting systems and the solar panels must not be anchored to the roof but should be retardant to easy theft. There are many ways of doing this and many theft retardant solutions can be put in place in addition to simply securing the perimeter of the solar installation. For a flat rooftop (which is typical) mounting solution must incorporate the location conditions so as to support the installation for its entire life while not harming the rooftop, which can cause serious structural damages.

Q) Do Solar Prices Already Include Subsidies?

A) Broadly speaking, they should! But practically there’s a catch, very few really claim or get the subsidies, but you shouldn’t worry about that. The point is, whether or not solar is subsidized as an end user your goal must be to calculate your benefits accrued against the current cost of power and the short and long term incremental costs, effectively called opportunity costs. What should also be looked for is the cost of not going doing anything, smart companies realize that the cost of maintaining status quo in a competitive market can be devastating. If your competitors can do it, you should give it serious thought now.

Cost effectiveness and life of as such solar setups can easily be determined by calculating the electricity costs that your solar power system will replace during its lifetime. What is needed is a simply to ask what is cost of energy from solar power solution.

Q) Fully Integrated Solar Solutions Versus Grey-market Solution Vendors.

A) Okay, so its not a question, but its important. A company that does complete solution from design using their own optimized products and commissioning by their own trained technicians rather than third party labor must be preferred. Of course pricing cannot be off the charts and should justify the solution and provided. A single point of actual service is always better than secondary vendors.

Is your solar system really cheaper

To this goal of peaceful solar investment, a company that manufactures most of the equipment required must be chosen over vendors that simply source components from third party. A locally manufactured high quality solar system along with local warranty and support is always a better choice.

 

 

Like what you’ve read? Click here to subscribe to this blog!

– See more at: http://www.sunipod.com/blog/is-commercial-rooftop-solar-feasible/#.U7FY5kDzx2E