Quick Mount PV Composition MountThere's no need for trimming shingles to force a fit. Drill one pilot hole into the rafter, backfill it with appropriate sealant, slide the Quick Mount flashing beneath the felt in the course above, drive the bolt home, and it's done! Quick Mount PV ™Composition Mount is an all-in-one waterproof flashing and mount to anchor photovoltaic racking systems, solar thermal panels, air conditioning units, satellite dishes, or anything you may need to secure to a new or existing roof. It is made in the USA of all aluminum and includes stainless steel hardware. It works with all standard racks, installs seamlessly and saves labor by not needing to cut away any roofing, will outlive galvanized 2 to 1, and is a better low-profile mount.
The 12 x 12-inch Classic Composition Mount flashing is designed to fit within a standard 5 to 5.5" course and the exposed course should be no greater than 5.75". If the exposure is greater than this, use the Shake Mount as an alternative. There's no shingle cutting and no shingle distortion caused by trying to force a fit. Just a permanent, watertight mount every time!
For more information visit our website www.sessionsolar.com or contact a team member at (831) 438-9000.
The information on this page was created and posted by the company identified above. RenewableEnergyWorld.com does not endorse, edit, or substantiate this information and assumes no obligation for this content's accuracy. |
Session Solar
|
Email
Bookmark
Print
Feed
Share
Add to my network
Visit Website
