ReadyWatt Custom Configured Combiner Boxes

The ReadyWatt® ETL® listed manufacturing facility can build custom configurable combiner boxes to meet your specific needs. A wide variety of sizes, voltages, circuitry and breaker/fuses can be configured together to service the demands of virtually any installation. Here are just two examples.

Example 1:
4-Circuit, High Voltage 32x32 Custom Sub-Combiner Combines the outputs of up to four combiner boxes into a single source circuit output. A configuration using four combiner boxes and one sub-combiner can combine up to 48 separate PV arrays

Special Features
The ReadyWatt® Sub-Combiner Box is an elegant, professional solution to the need for combining and staging your photovoltaic array wire runs. It features:

• Extra heavy duty enclosure
• Quality stainless steel fasteners
• Easy wire terminations
• ETL® listed to UL 508A standard
• NEC code compliance including, but not limited to 690.8, 314.40 and 690.9

Example 2:
12-Circuit, High Voltage 16x16 Custom Combiner Box
Combines multiple PV source circuits into one source circuit. Also provides a convenient location to begin the necessary conduit run from the PV array to the power conditioning equipment for up to 12 high voltage circuits.

Special Features
The ReadyWatt® Combiner Box is an elegant, professional solution to the need for combining and staging your photovoltaic array wire runs. It features:

• Liquid tight cord grips
• Pre-drilled for 1.5” condiut
• Easy wire terminations
• ETL® listed to UL 508A standard
• NEC code compliance including, but not limited to 690.8, 314.40 and 690.