Tired of the hassles associated with tradition fluorescent tubes? Complete total tradition to LED Technology with the EarthLED DirectLED FL Series. The DirectLED FL series is a replacement for tradition T8/T10/T12 fluorescent tubes allowing you to bring LED technology to environments never before possible.
DirectLED FL Series for General Illumination
DirectLED tubes are well-suited for use anywhere: homes, offices, museums, galleries, shop windows, hotels, restaurants, meeting rooms, just like conventional fluorescent lights.
DirectLED FL Series for Task Lighting
Task lighting is required for visually intensive environments, such as reading, writing or some kitchen counter top use. The great light quality of DirectLED FL makes your task lighting more effective and easier on your eyes. Locating DirectLED FL underneath your cabinets, shelves, office cubicles etc, can allow you to achieve an ideal task lighting setup. Furthermore, the linear profile of DirectLED FL is also unobtrusive to the design environment allowing them to be integrated anywhere a standard fluorescent is used.
DirectLED FL Series for Display Lighting and Signage
Good light quality and low heat generation makes DirectLED FL a great green alternative for display lighting. No longer worry about heat damage to your valuable merchandise displayed on your counter. You will also be surprised at the ideal display light cast by the quality light output of the DirectLED FL Series.
DirectLED FL is also an excellent candidate for signage back lighting. Since the DirectLED FL series features high output, only a small quantity of DirectLED FL tubes need to be utilized on a even a large billboard or sign. DirectLED FL allows you to instantly make your advertising and messaging energy efficient and Earth friendly.
Ballast Free Installation For Even More Power Savings.
The DirectLED FL Series does not require the use of a ballast thus allowing you to save even more energy. As an added benefit there is no ballast to break or fail ensuring even longer life. No ballast also means that the DirectLED FL can be used in T8, T10 or T12 fixtures for the ultimate in compatibility. Installation is simple but does require basic wiring knowledge. Simply disconnect or bypass the ballast during installation to install the DirectLED FL. If you do not feel comfortable with this type of basic wiring, please call an electrician.
DirectLED FL Utilizes 300 high power LEDs to provide 1500 lumens of quality, flicker-free light. DirectLED FL is an economical way to replace commonly used fluorescent tubes in your home or business.
Cost to run for one year : $4.38 (Calculated assuming 8 Hours a day operation, 365 Days a Year with $.10 KWh Electricity Cost)
Specifications and Dimensions
The information on this page was created and posted by the company identified above. RenewableEnergyWorld.com does not endorse, edit, or substantiate this information and assumes no obligation for this content's accuracy.