1.9 kW EOS Grid-Tied Solar Electric System<a href="http://www.gogreensolar.com/collections/grid-tie-solar-electric-systems/products/eos-1-9kw-grid-tied-solar-electric-system" target="_blank"><img src="http://static3.shopify.com/s/files/1/0011/4102/assets/purchase.png" border="0" alt="purchase solar grid tie system from GoGreenSolar.com" width="93" height="39" /></a> </p><p class="style1"> GoGreenSolar.com EOS 1.9kW grid-tie solar PV power systems are designed for use on residential and small commercial buildings. They consist of 10 high quality Mitsubishi (PV) solar panels, a SMA inverter, array wiring, DC and AC disconnects, professional mounting structures to secure panels on the roof, electrical drawings, data sheets, warranties and instructions. Solar Electric Photovoltaic starter system can be combined to form larger systems to meet your requirements, in the future. GoGreenSolar.com EOS 1.9kW grid-tie solar PV power systems are designed for use on residential and small commercial buildings. They consist of 10 high quality Mitsubishi (PV) solar panels, a SMA inverter, array wiring, DC and AC disconnects, professional mounting structures to secure panels on the roof, electrical drawings, data sheets, warranties and instructions. Solar Electric Photovoltaic starter system can be combined to form larger systems to meet your requirements, in the future. The GoGreenSolar.com EOS starter system can reduce part of your bill, or eliminate higher cost electricity in locations that have progressively increasing rates as consumption increases. The EOS solar electric starter kit system gives you all the benefits of utility interconnection and net metering for a low upfront investment. If you live in the USA, this solar electric kit qualifies for the federal tax credit and you may qualify for rebates depending on the state you live in.
• All DC wiring and Generation 2 connectors for module to module interconnection • All ground lugs, ground wire, ground rod, & clamps to properly ground the array • All DC wiring,conduit, connectors, and fittings to run power from roof down to inverter • All AC wiring,conduit, connectors, & AC disconnect to connect inverter to service panel *Racking System includes:* • All aluminum rails, stanchions, splice kits, inter-module clamps, & end clamps • All stainless steel fasteners, flashings, tubes of sealant, & wire management The information on this page was created and posted by the company identified above. RenewableEnergyWorld.com does not endorse, edit, or substantiate this information and assumes no obligation for this content's accuracy. |
GoGreenSolar.com
|

Feed
Share
*Balance of System includes:* 








