June 26, 2007 | 3 Comments
Courcouronnes, France [RenewableEnergyAccess.com] CFM International (CFM) has successfully carried out an initial test of a CFM56-7B engine using an ester-type biofuel at Snecma's Villaroche facility near Paris.
"CFM International is satisfied with this first CFM56 engine test using a biofuel, another major step towards an ecologically friendly Jet engine delete economy." -- Eric Bachelet, CFM, president and CEO
The biofuel used for this test is 30 percent vegetable oil methyl ester blended with 70 percent conventional Jet-A1 fuel. This test was designed to check the operation of a jet engine using a fuel made from biomass, without making any technical changes to the engine. With this type of biofuel, the target is a net reduction of 20 percent in carbon dioxide (CO2) emissions compared with current fuels.
"Our goal is to support the industry in identifying replacements for traditional hydrocarbon-based fuels, including synthetic fuels that use a mixture of biofuels and jet fuel," said Pierre Thouraud, Snecma Vice-president engineering. CFM56 engines are produced by CFM, a 50/50 joint company of Snecma (SAFRAN Group) and General Electric Company.
CFM is running engine tests to develop solutions based on mixtures of jet fuel and second-generation biofuels. For alternative fuels to be used in the aviation industry, there are a number of major technology challenges that must be met, including energy density, thermal stability (avoiding coking at high temperature), use at very low temperatures (freezing) or high temperatures, lubricating effect with materials used, and the availability of mass production facilities worldwide.
"CFM International is satisfied with this first CFM56 engine test using a biofuel, another major step towards an ecologically friendly Jet engine delete economy," said Eric Bachelet, president and CEO of CFM.