Rolls Battery Engineering
June 08, 2009
Surrette Battery, manufacturer of the Rolls Battery line of leading North American lead-acid batteries, has added two new higher capacity L-16 models to its growing Solar/Renewable Energy line-up.
Higher Capacity L-16’s: A further addition to our well-known L-16 range, the S-600 is our highest capacity (450AH, 20 hr - 600AH, 100 hr) L-16 enabling higher capacity banks with fewer connections.
Additionally, we’ve introduced a true 2V L-16. The S-1380 is comprised of the three (3) groups from our renowned S-460 welded as a single cell by our robotic COS station. A four (4) post configuration, two (2) posts per terminal, is used to support the potential loads of a 1,050AH (20hr rate) cell. With a single vent to maintain and a single threaded take-off, a large battery bank can be created without parallel connections - minimizing maintenance and maximizing charge efficiency.
The new S-600 and S-1380 models are currently in production and are now available to consumers through distributors and dealers.
S-600 Specifications: S-1380 Specifications:
6-Volt (3 cell) 2-Volt (1 cell)
Model: S-600 Model: S-1380
Overall Dims: 12.5" x 7.125" x 16.75" Overall Dims: 13 1/8" x 7 1/8" x 17"
Weight: 131 Lbs/59 Kg Weight: 117 Lbs/53 Kg
Capacity: 600 AH 100 HR Capacity: 1380 AH 100 HR
450 AH 20 HR 1050 AH 20 HR
For more information about the new S-600 and S-1380 models, please visit: www.rollsbattery.com
The information on this page was created and posted by the company identified above. RenewableEnergyWorld.com does not endorse, edit, or substantiate this information and assumes no obligation for this content's accuracy.