Xantrex TFB400, 400A Class T fuse and holder w/studs
Use these single-pole Class T fuse blocks to fuse inverters or other large loads. A 5/16" stud mount at each end of the fuse allows connection of a cable with a ring lug terminal end. To connect an inverter, order two cables with lugs on both ends: one to go from the battery to the fuse and one to go from the fuse to the inverter. Class T fuses exceed the 10,000-amp interrupting capacity (AIC) required to protect Square-D brand circuit breakers in DC load centers. They are UL Listed for up to 160VDC and NEC approved for inverter use. A fuse comes installed in the block. Order spare fuses separately.
The information on this page was created and posted by the company identified above. RenewableEnergyWorld.com does not endorse, edit, or substantiate this information and assumes no obligation for this content's accuracy.