Photo Credit: Idaho National Laboratory
article tools
Increase Text Size Increase Text Size Decreate Text Size Decrease Text Size
Share Email This Story Share Share This Story Reader comments Reader Comments (16) View image gallery Image Gallery (2) Add to favorites Add to Bookmarks Printer friendly version Printer Friendly Version
Article Tool Sponsor:

Advertise with us

More Jobs
0 ratings - Sign-in to rate this article
August 12, 2008

Flexible Nanoantenna Arrays Capture Solar Energy

by Roberta Kwok, Idaho National Laboratory
Florida, United States [RenewableEnergyWorld.com]

Researchers have devised an inexpensive way to produce plastic sheets containing billions of nanoantennas that collect heat energy generated by the sun and other sources. The researchers say that the technology, developed at the U.S. Department of Energy's Idaho National Laboratory (INL), is the first step toward a solar energy collector that could be mass-produced on flexible materials.

While methods to convert the energy into usable electricity still need to be developed, it is envisioned that the sheets could one day be manufactured as lightweight "skins" that power products such as hybrid cars or iPods with potentially higher efficiency than traditional solar cells. The nanoantennas also have the potential to act as cooling devices that draw waste heat from buildings or electronics without using electricity.

The nanoantennas target mid-infrared rays, which the Earth continuously radiates as heat after absorbing energy from the sun during the day. In contrast, traditional solar cells can only use visible light, rendering them idle after dark. Infrared radiation is an especially rich energy source because it also is generated by industrial processes such as coal-fired plants.

"Every process in our industrial world creates waste heat," says INL physicist Steven Novack. "It's energy that we just throw away." Novack led the research team, which included INL engineer Dale Kotter, W. Dennis Slafer of MicroContinuum Inc. and Patrick Pinhero, now at the University of Missouri.

The nanoantennas are tiny gold squares or spirals set in a specially treated form of polyethylene, a material used in plastic bags. While others have successfully invented antennas that collect energy from lower-frequency regions of the electromagnetic spectrum, such as microwaves, infrared rays have proven more elusive. Part of the reason is that materials' properties change drastically at high-frequency wavelengths, Kotter says.

The researchers studied the behavior of various materials — including gold, manganese and copper — under infrared rays and used the resulting data to build computer models of nanoantennas. They found that with the right materials, shape and size, the simulated nanoantennas could harvest up to 92 percent of the energy at infrared wavelengths.

The team then created real-life prototypes to test their computer models. First, they used conventional production methods to etch a silicon wafer with the nanoantenna pattern. The silicon-based nanoantennas matched the computer simulations, absorbing more than 80 percent of the energy over the intended wavelength range. Next, they used a stamp-and-repeat process to emboss the nanoantennas on thin sheets of plastic. While the plastic prototype is still being tested, initial experiments suggest that it also captures energy at the expected infrared wavelengths.

The nanoantennas' ability to absorb infrared radiation makes them promising cooling devices. Since objects give off heat as infrared rays, the nanoantennas could collect those rays and re-emit the energy at harmless wavelengths. Such a system could cool down buildings and computers without the external power source required by air-conditioners and fans.

More technological advances are needed before the nanoantennas can funnel their energy into usable electricity. The infrared rays create alternating currents in the nanoantennas that oscillate trillions of times per second, requiring a component called a rectifier to convert the alternating current to direct current. Today's rectifiers can't handle such high frequencies.

"We need to design nanorectifiers that go with our nanoantennas," says Kotter, noting that a nanoscale rectifier would need to be about 1,000 times smaller than current commercial devices and will require new manufacturing methods. Another possibility is to develop electrical circuitry that might slow down the current to usable frequencies.

If these technical hurdles can be overcome, nanoantennas have the potential to be efficient harvesters of solar energy. Because they can be tweaked to pick up specific wavelengths depending on their shape and size, it may be possible to create double-sided nanoantenna sheets that harvest energy from different parts of the sun's spectrum, Novack says.

The team's stamp-and-repeat process could also be extended to large-scale roll-to-roll manufacturing techniques that could print the arrays at a rate of several yards per minute.

The researchers will be reporting their findings on August 13 at the American Society of Mechanical Engineers 2008 2nd International Conference on Energy Sustainability in Jacksonville, Florida.

Roberta Kwok is a Research Communications Fellow at Idaho National Laboratory.

Image Gallery (2)
 
Reader Comments (16)
 
No image available
August 12, 2008
This technology is founded on the pioneering patents of Alvin Marks who described it all in patents more than 25 years ago. http://www.patentstorm.us/patents/4445050.html
Too bad our brain dead government did not have the foresight to throw major funding to this former defense department scientist back then. In fact, he developed patents for all the major manufacturing issues of such devices and more. http://www.patentstorm.us/search.html?q=%22alvin+marks%22&s.x=0&s.y=0&s=s
Ironic that Federal national labs now take credit for this work.
Comment 1 of 16
No image available
August 12, 2008
While this material is very interesting and possesses an extraordinary efficiency, its use in commercial power generation will probably be limited due to the fact that it appears to absorb only a small part of the spectrum (short of significant advances in photon up- and down-conversion). However, the possibility of a device to convert IR to visible light for the purpose of climate management is certainly intriguing.
Comment 2 of 16
No image available
August 13, 2008
Interesting but I wonder how much energy the rectifiers will sap from the 80% efficient reported energy gain. There always seems to be a catch that reduces the obtained energy quite dramatically.
Comment 3 of 16
No image available
August 13, 2008
Even if the rectifiers drain 50% of the energy gain this technology will still outclass existing PV technology in both yield and production cost/application.

The applications for a high yield film in the hybrid vehicle industry and domestic homes/commercial buildings alone ,justifies a massive financial injection and focus into getting this product to world markets within the next 4 years or sooner!
Comment 4 of 16
No image available
August 13, 2008
The key to all the alternative energy sources is inexpensive transducers that convert whatever form of power into electricity power which is usually the most efficient and flexible power supply for systems. Thermal systems are efficient but the equipment is relatively expensive currently and therfore prohibitive since the infrastructure for designing and manufacturing the equipment is not readily available or accessible.
Comment 5 of 16
No image available
August 13, 2008
Most durable plastics are made from petroleum products, yes? What sort of environment impact would large scale manufacturing of this have on resources and the environment?
Comment 6 of 16
No image available
August 13, 2008
I'm a little confused by the claim that this process is inexpensive when it involves the use of gold. Is the amount of gold used incredibly small?
Comment 7 of 16
No image available
August 13, 2008
As a bridging application until the high speed electronics are perfected is to use this as a solar domestic hot water panel - it's perfect. Thin, inexpensive, efficient. No more glycol, plumbing, overheating etc. Run the power into an electrical heating element in the tank - probably doesn't matter that it's cycling trillions of times per second. This could be the ultimate solar domestic hot water panel.
Comment 8 of 16
August 13, 2008
Jeff Thorn; you may be surprised that solar thermal is far cheaper than fuel burning and electricity for heating at a dollar a watt for water heating collectors. Payback compared to conventional systems is five to ten years, lesser as current energy costs rise.
Tama; we currently BURN petroleum for energy. Would it not make more sense to make a durable product with it.
This nano-antenae tec seems practical since electro-magnetic spectrum energy only needs adaptation to what we deem as wanted to power our stuff. Light and heat spectrums "merely" need rectification and transformation to grid frequencies and powers.
Comment 9 of 16
No image available
August 13, 2008
The idea of using this technology for cooling is very intriguing. Here in California, we use about 30% of our electrical energy on cooling on peak summer days. Using these panels on rooftops could dramatically reduce our peak power requirements and load on the grid.
Comment 10 of 16
No image available
August 13, 2008
The key thing for me is that there are practical applications right now that don't require the high speed rectifier issue to be resolved. Producing electricity for resistive heating loads which may include domestic hot water or space heating are two examples. Absorbing the infrared energy to aid in cooling - and producing subsequently useful resistive heating elsewhere is another example.
The high speed rectification and power quality issues are not holding back this technology from profitable applications right now.
Comment 11 of 16
No image available
August 13, 2008
As I understand it, the reason that rectification is needed is that the high frequency AC from millions of sub-micron antennas is not synchronized. In other words, without rectification, the output on average would be zero as opposing waves cancel each other out (destructive interference).
Comment 12 of 16
No image available
August 13, 2008
This sounds too much like a free energy device. You may never see a working model..Ever. Good article though.
Comment 13 of 16
No image available
August 13, 2008
I too wondered about the gold. It seems they announce breakthrough after breakthrough in nanotechnology and then you never hear of it being produced at an affordable cost.
Comment 14 of 16
No image available
August 14, 2008
Won't this method require ~REALLY FAST~ diodes ???

Checked out patent 4445050... Yep, that sure looks like it alright.

boB
Comment 15 of 16
No image available
August 22, 2008
Why bother with the antennas? If you can get diodes with such low forward voltage the thermal motion of the electrons would be sufficient to drive them through these magic one way valves. Maxwell's demons cannot function and never will.

If such a device could work one could use it to transfer energy from one body to another even if both started at the same temperature and were both in an insulated box. This can not happen in our universe.

Perhaps if infrared black body radiation was low entropy coherent radiation like radio or microwave transmissions the system might work. Otherwise, one cannot defy the 2nd law of thermodynamics.
Comment 16 of 16
Add Your Comment

Registered users, please make sure to Sign-In. We and others want to know your ideas and opinions. If you are not yet Registered -- it's quick and easy. Just click below.
Thanks!

Register Now   Sign-In
Featured Total Access Partners
Click company logos to learn more
Comdel Krannich Solar Inc. Stoel Rives LLP Sharp Solar Energy Solutions Group Virtual Energy Forum Green Power Labs Inc.
WORLD'S #1 RENEWABLE ENERGY NETWORK
World's #1 Renewable Energy Network Logo