Photo Credit: RWE Schott Solar
article tools
Increase Text Size Increase Text Size Decreate Text Size Decrease Text Size
Share Email This Story Share Share This Story Reader comments Reader Comments (3) View image gallery Image Gallery (1) Add to favorites Add to Bookmarks Printer friendly version Printer Friendly Version
Article Tool Sponsor:

Advertise with us

More Jobs
0 ratings - Sign-in to rate this article
June 20, 2005

Solar BIPV pulls into Brooklyn Train Station

Brooklyn, New York [RenewableEnergyAccess.com]

The newly reconstructed Stillwell Avenue subway station in Brooklyn has become the city's first solar-powered train terminal, and one of the most environmentally friendly mass transportation sites ever built in the United States. It's also among the more prominent displays of how solar photovoltaic (PV) power can be architecturally integrated into a large structure.

"Solar systems don't have to be bulky add-ons to a structure anymore, but become an integral part of it."

- Steve Cohen, Product Manager, Architectural Glass for RSS

The 76,000-square foot solar roof, manufactured by RWE Schott Solar (RSS), is expected to contribute approximately 250,000 kWh a year to the station's power needs.

"For the first time, the city's subway system will have a clean and efficient source of energy, an environmentally sound way to keep this terminal up and running round the clock, year round," said Donald Press, General Manager, Advanced Materials at RSS. "The MTA has surely set an example for the rest of nation."

The new arched solar roof, consisting of 2,730 building integrated photovoltaic panels (BIPVs), covers the full width of the station and offers effective weather protection for travelers as well as station facilities. This seamless integration of the technology gives it a distinct aesthetic quality.

"Stillwell Avenue Station showcases what can be done with photovoltaics today," said Steve Cohen, Product Manager, Architectural Glass for RSS. "Solar systems don't have to be bulky add-ons to a structure anymore, but become an integral part of it."

RSS said their thin-film panels solar modules are the largest in the world, requiring less framing to reduce installation costs. The partially transparent 5' x 20' glass laminate panels used in the station are made of clear glass and strips of thin-film amorphous silicon material.

According to RSS, longevity and easy maintenance were primary concerns for the project, because New York's subway system operates around the clock and shutdowns are expensive.

"Integrating the technological and aesthetic vision for the station with the rigorous requirements of the MTA made this project especially challenging," says Press.

The solar roof was designed for easy access, allowing for maintenance and replacement of panels from above via an arched gantry and integrated maintenance cat walks. Monitoring makes detection of panels that are not functioning easy. Prior to installation, RSS Solar coded and tested each panel for size, weight and wattage.

These specifics were entered into the monitor system to allow for quick detection of any deviation. Once identified, a problematic panel can be tested right on the shed and then easily replaced, if necessary. The MTA mandates specific light levels for platforms, based on perceptions of safety and security. The solar shed roof allows 20-25% light transmission, helping to meet these requirements while reducing costs for daytime lighting.

"The Stillwell Avenue Station shows that a large public agency can lead the way when it comes to environmentally sound construction," says Press. "This station is destined to serve as a model for other projects throughout the country."
Image Gallery (1)
 
Reader Comments (3)
 
No image available
Anonymous
June 21, 2005
NYC needs to put solar thermal on all of the rooftops of all of the buildings in NYC.

Solar thermal is incredibly cheap and reduces the need for fossil energy sources, such as natural gas to heat water.

Solar thermal can make a huge reduction in natural gas usage and greenhouse gas emissions.

With the reduction in natural gas usage, the utilities would have to lower their prices for natural gas.

What would the utilities do with all of their extra gas?
Comment 1 of 3
No image available
Anonymous
June 21, 2005
Now NYC needs to install a wind generator onto of every highrise building in the city and them they could cut the ties to the grid! Remember a couple years ago when NYC went BLACK at 4:30 pm and everyone went "psycho", "another attack!!" NO just a FUBAR - "Fu34ed Up Beyond All Repair" of the energy distribution in OHIO! It's time to look to the future and take some advice from Europe. They have a mandate to have 20% of their energy to be from renewables by 2010.


But with Bush taking advice from Exxon-Moblie of the global warming problem we will be stuck in the 19th century. Here's a link to the PROOF-sorry GOP sheep...
http://www.guardian.co.uk/climatechange/story/0,12374,1501646,00.html

Write letters to your congressmen and let them know that you WILL NOT VOTE FOR THEM if they follow blindly.
Comment 2 of 3
No image available
April 21, 2007
Wrong. The city doesn't need to put solar panels on the top of every building. The citizens in a 'free market' system should. The citizens should install solar panels on their building and sell the energy back to the energy companies for a profit. When it becomes profitable for the market the market will do it. Dont demand the taxpayers pay for it. Do it yourself and make money doing it.
Comment 3 of 3
Add Your Comment

Registered users, please make sure to Sign-In. We and others want to know your ideas and opinions. If you are not yet Registered -- it's quick and easy. Just click below.
Thanks!

Register Now   Sign-In
Featured Total Access Partners
Click company logos to learn more
Lectrus Mitsubishi Electric & Electronics USA, Inc. HUBER+SUHNER BP Solar Schüco Canadian Solar Inc.
WORLD'S #1 RENEWABLE ENERGY NETWORK
World's #1 Renewable Energy Network Logo